Various Air Diving Equipment

Lot of air diving equipment as follows:

• Divex air panel for 2 divers portable, with hp hoses, air bleed for venting hoses;
• Two 60m diving twisted umbilicals ½ heavy duty fibron rigs, with video/lighting cable;
  • One has an additional cable for power and twisted pair for external equipment.
• Superlight 17B and DSI 18B bandmask;
• Two of Amron two diver comboxes with headsets;
• Some spares;
• Air cylinders 2 of 2x18 L 232, 1 of 2x15L, 2 of 10L, 2 of 8 L (tested 2022);
• One Stanley Hp 10, 18 hp petrol 140 bar 20/40L per min selector valve (27 hrs); 
• 4 off stanley underwater hand tools; HD 45 combined drill/breaker, CS07 chain saw, IW12 ¾ inch hydr wrench, GR 27 grinder;
• 25m of kevlar hydr hose in yellow polythene spiral wrapping for tools;
• Air lift 15 m: Stainless steel, diam 200 mm, length 2000mm with flanges, 7 pieces;
  • One 1000mm with flange and one 90 degree bend, one outfall pipe L 6000mm diam 300mm. 
  • Air manifold with valves and air connectors, 2 off 25m one inch air hoses. 
  • Flanges are bolted by 3  bolts to next flange. Dual air intake 1 inch at bottom end.

• High pressure water unit, 200bar at 30 l/min, 3 phase 400 v 50hz 15 hp, on skid with 4 wheels;
• Kevlar 250m 1 inch high pressure water hose in sections (120,80,60 meters);
• 25 m HP water hose with lances;
• Rotary dual cleaning with spinning nozzles for internal cleaning of pipelines;
• One Flygt Bibo 4, 9 kw submersible dual stage water pump for diver hand nozzle, electric y/d starter box;
• Firepump Ziegler UP4, 60 hp 2500L/M at 8 bar (16 bar, 45 hrs only, dual outport valves, 2 suction hoses).
• UW cleaning brush machine, dual hydr motors, dual counter rotating brushes in HD 1000 plastic T 25 mm; 
• 90 meter of twin kevlar ¾ and 1 inch hose on wooden drum with connectors, wrapped in yellow polythene sheath (neutral in water).

• Two DSI full  EXO 26 full face masks with regulators etc serviced;
• 4 of diam 63 mm, flat hose 40 bar, length each 25 m, one diam 38 mm;
• One Automarine 5 ton open lift bag, 1 ton and 500kg bags;
• One complete set of single side band coms, topside unit and two diver units;
• One 3 phase electric 3 phase steel winch on a wooden palette, 5 kw ca 3 ton pulling capacity 100 m of 16 mm wire, remote on/off;
• 5 of 1 inch epdm air hose L 50 m each;
• One Kinshofer 607 hydraulic excavator bucket with teeth and dual hydraulic cylinders, 3 ton closing force;
• Extensions square steel beams 2 meter and one 1 meter with attachment for rotator;
• Palfinger rotator with hose and fittings;

Contact us for further information.